Skip to main content
Protection and Control of Modern Power Systems
Fig. 7 | Protection and Control of Modern Power Systems

Fig. 7

From: Adaptive fractional integral terminal sliding mode power control of UPFC in DFIG wind farm penetrated multimachine power system

Fig. 7

The response of the proposed and conventional controls of the admittance model of the UPFC for a three phase to ground fault at time t = 2.11 s on the bus 7 of the test system as shown in Fig. 5, with a lower penetration of the DFIG wind farm which is subjected to a fixed speed of 6.29 m/s, where, a the admittance of the UPFC at bus ‘m’ in p.u., b the admittance of the UPFC at bus ‘n’in p.u., c the active power injection of the DFIG (p.u.), and d the interarea oscillation between the generators ‘1′ and ‘4′ in Rad/s, respectively

Back to article page